INNOVATIVE CHEMICAL COATING PROTOCOL FOR TITANIUM ALLOY IMPLANTS

Authors

  • Gabriel ARMENCEA Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: armencea.gabriel@umfcluj.ro. https://orcid.org/0000-0003-1087-8522
  • Grigore BĂCIUȚ Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Corresponding author: dinu_christian@yahoo.com. https://orcid.org/0000-0001-8473-0091
  • Sergiu VACARAS Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: vacaras_sergiu@yahoo.com.
  • Florin ONIȘOR Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: dr_onisorf@yahoo.com. https://orcid.org/0000-0003-1076-7726
  • Bogdan CRIȘAN Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: crisan.bogdan@umfcluj.ro. https://orcid.org/0000-0003-2898-0162
  • Ioan BARBUR Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Corresponding author: dinu_christian@yahoo.com.
  • Liana CRISAN Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: petrutliana@yahoo.com. https://orcid.org/0000-0002-3307-1812
  • Ondine Patricia LUCACIU Department of Oral Rehabilitation, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: patricia.lucaciu@umfcluj.ro. https://orcid.org/0000-0002-0092-8955
  • Mădălina LAZĂR Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: madilazar@yahoo.com. https://orcid.org/0000-0002-6141-515X
  • Cristian DINU Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: dinu_christian@yahoo.com.
  • Simion BRAN Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: dr_brans@yahoo.com. https://orcid.org/0000-0003-2632-4284
  • Dan LEORDEAN Department of Manufacturing Engineering, Technical University, Cluj-Napoca, Romania. Email: Dan.Leordean@tcm.utcluj.ro. https://orcid.org/0000-0002-3162-0283
  • Adriana VULPOI Faculty of Physics & Institute of Interdisciplinary Research in Bio-Nano-Sciences, Babes Bolyai University, Cluj-Napoca, Romania. Email: adrianavulpoilazar@gmail.com. https://orcid.org/0000-0001-5334-4980
  • Milica TODEA Faculty of Physics & Institute of Interdisciplinary Research in Bio-Nano-Sciences, Babes Bolyai University, Cluj-Napoca, Romania. Email: militodea@yahoo.com. https://orcid.org/0000-0002-8958-4035
  • Cristian BERCE Animal Facility Laboratory, Centre for Experimental Medicine, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Corresponding author: dinu_christian@yahoo.com. https://orcid.org/0000-0002-5073-8172
  • Mihaela BĂCIUȚ Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: mbaciut@umfcluj.ro. https://orcid.org/0000-0003-3495-2758

DOI:

https://doi.org/10.24193/subbchem.2019.1.17

Keywords:

chemical coating, Ti6Al7Nb, surface treatment, bioactivity, SLM, laser processing

Abstract

This paper aims to investigate the “in vivo” behavior (over an extended period of time, namely six months) of hydroxyapatite and SiO2-TiO2 coating of Ti6Al7Nb alloy implants manufactured by selective laser melting. Innovative chemical implant coating by immersion technique was studied and the results were analyzed by optical and scanning electron microscopy (SEM). The results showed better osseointegration process for the coated implants and a much stabler biological behavior on the surface of the chemically treated implants.

 

References

A. Insua, A. Monje, H.L. Wang, R.J. Miron, J Biomed Mater Res A, 2017, 105 (7), 2075.

L. Bolzoni, E.M. Ruiz-Navas, E. Neubauer, E. Gordo, J Mech Behav Biomed Mater, 2012, 9, 91.

S. Ponader, C. von Wilmowsky, M. Widenmayer, R. Lutz, P. Heinl, C. Körner, R. F. Singer, E. Nkenke, F. W. Neukam, K.A. Schlegel, J Biomed Mater Res A, 2010, 92, 56.

Y. Yang, K. Serpersu, W. He, S. Paital, N.B. Dahotre, Materials Science and Engineering, 2011, 31, 1643.

K. Kordbacheh, J. Finkelstein, P.N. Papapanou, Clin Oral Implants Res, 2019, 15, 145.

E. Pippenger, M. Rottmar, B.S. Kopf, S. Stübinger, T.F.H. Dalla, S. Berner, K.M. Weber, Clin Oral Implants Res, 2019, 30, 99.

A.B. Novaes, S. L. de Souza, R. R. de Barros, K. K. Pereira, G. Lezzi, A. Piattelli, Braz Dent J, 2010, 21, 471.B.

D. Gheban, J Rom Patologie, 2005, 8, 193.

G. Armencea, C. Berce, H. Rotaru, S. Bran, D. Leordean, C. Coada, M. Todea, C.A. Jula, D. Gheban, G. Baciut, M. Baciut, R.S. Campian, Clujul Med., 2015, 88, 408.

G. Armencea, C. Berce, H. Rotaru, S. Bran, S. Vesa, D. Leordean, C.A. Jula, D. Gheban, M. Lazar, G. Baciut, M. Baciut, R.S. Campian, Optoelectronics and Advanced Materials-Rapid Communications, 2015, 9, 865-871.

M. Ramazanoglu, Y. Oshida, I. Turkyilmaz, Implant Dentistry-A Rapidly Evolving Practice, 2011, 31, 134.

K. Søballe, Acta Orthop Scand Suppl, 1993, 255, 1-58.

Eisenbarth, D. Velten, M. Müller, R. Thull, J. Breme, Biomaterials, 2004, 25, 5705.

C. Castellani, R.A. Lindtner, P. Hausbrandt, E. Tschegg, S.E. Stanzl-Tschegg, G. Zanoni, S. Beck, A.M. Weinberg, Acta Biomater., 2011, 7, 432.

Y. Yang, S. Paital, N.B. Dahotre, J of Materials Science. Materials in Medicine, 2010, 21, 2511.

W.R. Lacefield, N.Y. Ann, Acad Sci, 1988, 523, 72.

T. Moskalewicz, A. Babkiewicz, B. Dubiel, M. Kot, A. Radziszewska, A. Łukaszczyk, Archives of Metallurgy and Materials, 2016, 61, 52.

V. Sansone, D. Pagani, M. Melato, Clin Cases Miner Bone Metab, 2013, 10, 34.

C.C. Gomes, L.M. Moreira, V.J. Santos, A.S. Ramos, J.P. Lyon, C.P. Soares, F.V. Santos, Genet Mol Biol, 2011, 34, 116.

T.L. Alzubaydi, S.S. Alameer, T. Ismaeel, A.Y. Alhijazi, M. Geetha, J Mater Sci Mater Med, 2009, 20, 35.

B. Shuai, L.Shen, Y. Yang, C. Ma, R. Zhu, X. Xu, PLoS One, 2015, 10, 110.

R. Family, M. Solati-Hashjin, N. S. Namjoy, A. Nemati, Caspian J Intern Med, 2012, 3, 460-466.

M. Hussein, A. Mohammed, N. Al-Aqeeli, Materials, 2015, 8, 2749.

S.L. Teitelbaum, Science, 2000, 289, 1504.

M.G. Mullender, R. Huiskes, H. Weinans, Journal of Biomechanics, 1994, 27, 1389.

M. Todea, A. Vulpoi, C. Popa, P. Berce, S. Simon, Journal of Materials Science & Technology, 2019, 35, 418.

R. Barabas, M. Rigo, M.E. Bodogh, C. Moisa, O. Cadar, Studia UBB Chemia, 2018, LXIII, 137.

O. Cadar, R. Balint, G. Tomoaia, D. Florea, I. Petean, A. Mocanu, O. Horovitz, M.T. Cotisel, Studia UBB Chemia, 2017, LXII, 4, Tom II, 269.

T. Marcu, M. Todea, L. Maines, D. Leordean, P. Berce, C. Popa, Powder Metall., 2012, 55, 309.

ATI Titanium 6Al-7Nb Alloy, Technical Data Sheet, http://www.atimetals.com/allvac/pages/PDF/tech/TI-023%20Ti-6Al-7Nb%20.pdf

M.D. Gamal, M. Mohamed, M.E. Hussiein, M.E. Beltagi, J. Gastroenterology and Hepatology, 2004, 19, 78.

Downloads

Published

2019-03-29

How to Cite

ARMENCEA, G. ., BĂCIUȚ, . G. ., VACARAS, S. ., ONIȘOR, F. ., CRIȘAN, B. ., BARBUR, I. ., … BĂCIUȚ, M. . (2019). INNOVATIVE CHEMICAL COATING PROTOCOL FOR TITANIUM ALLOY IMPLANTS. Studia Universitatis Babeș-Bolyai Chemia, 64(1), 207–218. https://doi.org/10.24193/subbchem.2019.1.17

Issue

Section

Articles

Similar Articles

<< < 12 13 14 15 16 17 18 19 20 21 > >> 

You may also start an advanced similarity search for this article.