POWER CONSUMPTION FOR MIXING OF SHEAR-THINNING FLUIDS

Authors

  • Adina GHIRIŞAN (MICLĂUŞ) Babeş-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos str., RO-400028, Cluj-Napoca, Romania. https://orcid.org/0000-0002-4625-6525
  • Vasile MICLĂUŞ Babeş-Bolyai University, Faculty of Chemistry and Chemical Engineering, 11 Arany Janos str., RO-400028, Cluj-Napoca, Romania. *Corresponding author: vasile.miclaus@ubbcluj.ro https://orcid.org/0000-0002-4625-6525

DOI:

https://doi.org/10.24193/subbchem.2021.2.21

Keywords:

mixing, agitation, Reynolds number, power number, power consumption, non-Newtonian fluids, shear-thinning fluids.

Abstract

The mixing/agitation of time independent non-Newtonian fluids can be a challenge in many technological processes. In the present study, the influence of rheological parameters, K and n, on Reynolds number, power number and power consumption, for different concentration of carboxymethyl cellulose (CMC) solutions, 1%, 2%, 3%, 4 % and 5%, with shear-thinning behaviour, was analysed. The power consumption obtained by theoretical model and by an appropriate curve Po = f(Re) from experimental data, found in literature, was compared. The results have shown good agreement between calculated power number and the graphically determined values, and also minimal power consumption values comparable with those founded for the agitation of non-Newtonian liquids.

References

R.R. Chhabra; J.F. Richardson, Non-Newtonian Flow in the Process Industries. Fundamentals and Engineering Applications, 2nd ed.; Publisher: Butterworth Heinemann, Linacre House, Jordan Hill, Oxford, Great Britain, 2008; Chapter 8, pp. 325–358.

M. Cortada-Garcia; V. Dore; L. Mazzei; P. Angeli; Chem. Eng. Res. Des., 2017, 119, pp. 171-182.

G. Ascanio; B. Castro; E. Galindo; Chem. Eng. Res. Des., 2004, 82, 1282–1290.

A. Ghirisan; C.I. Anghel; S. Dragan; In Proceedings of the 41st International Conference of Slovak Society of Chemical Engineering, Editor: J. Markoš, Slovakia, 2014, pp. 863–872.

C. Chang; L. Zhang; Carbohyd. Polym., 2011, 84, 40-53.

C. Barba; D. Montane; X. Farriol; J. Desbrieres; M. Rinaudo; Cellulose, 2002, 9, 327-335.

A.B. Metzner; R.E. Otto; AIChEJ, 1957, 3, 3-10.

A.H.P. Skelland; in Handbook of Fluids in Motion, Edited by N. P. Cheremisinoff and R. Gupta, Ann Arbor Science, Ann Arbor, 1983, Chapter 7, pp. 623-860.

J.C. Godfrey; Static mixers, in Mixing in the Process Industries, Edited by N. Harnby, M.F. Edwards and A.W. Nienow, Butterworth-Heinemann, Oxford, 2nd edition, 1992, Chapter 12, pp. 225-249.

J. Wang; L. Feng; X. GU; et al.; J. Chem. Eng. Sci., 2000, 55(12), 2339–2342.

D. Patel; F. Ein-Mozaffari; M. Mehrvar; Chem. Eng. Res. Des., 2015, 100, pp. 126-134.

Z.Y. Nor; A.A. H. Zafarizal; E.A.O. Nur; A.M. Yusrabbil, J. Oil Palm Research, 2020, in press Published online: 9 December 2020

D. Luan; Q. Chen; S. Zhou; Chin. J. Mech. Eng., 2014, 27(3), 635-640.

K. Yapici; B. Karasozen; M. Schaefer; Y. Uludag; Chem. Eng. Process: Process Intensification, 2008, 47, 1340–1349.

Downloads

Published

2021-06-30

How to Cite

GHIRIŞAN (MICLĂUŞ), A., & MICLĂUŞ, V. (2021). POWER CONSUMPTION FOR MIXING OF SHEAR-THINNING FLUIDS. Studia Universitatis Babeș-Bolyai Chemia, 66(2), 247–254. https://doi.org/10.24193/subbchem.2021.2.21

Issue

Section

Articles

Most read articles by the same author(s)