EVALUATION OF THE MORPHOLOGY AND STRUCTURE OF E GLASS FIBER-REINFORCED COMPOSITES FOR CRANIO-FACIAL BONE RECONSTRUCTION

Authors

  • Mădălina-Anca LAZĂR Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: madilazar@yahoo.com. https://orcid.org/0000-0002-6141-515X
  • Horaţiu ROTARU Department of Implantology and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Corresponding author: madilazar@yahoo.com. https://orcid.org/0000-0003-2138-3322
  • Doina PRODAN Department of Polymer Composites, Raluca Ripan Institute for Research in Chemistry, Babes Bolyai University, Cluj-Napoca, Romania. Corresponding author: hrotaru@yahoo.com. https://orcid.org/0000-0003-2467-2453
  • Gabriel ARMENCEA Department of Oral and Maxillofacial Surgery, Iuliu Hatieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Email: armencea.gabriel@umfcluj.ro. https://orcid.org/0000-0003-1087-8522
  • Paul BERE Department of Manufacturing Engineering, Technical University, Cluj-Napoca, Romania. Corresponding author: hrotaru@yahoo.com. https://orcid.org/0000-0001-5032-6533
  • Rareș Călin ROMAN Department of Cranio-Maxilo-Facial Surgery, Iuliu Hațieganu University of Medicine and Farmacy,Cluj-Napoca, Romania. Email: raresroman@yahoo.com. https://orcid.org/0000-0003-0620-2845
  • Radu Septimiu CÂMPIAN Department of Oral Rehabilitation, Faculty of Dentistry, Iuliu Hațieganu University of Medicine and Pharmacy, Cluj-Napoca, Romania. Corresponding author: hrotaru@yahoo.com. https://orcid.org/0000-0001-6233-8822

Keywords:

biocomposites, reconstructive surgery, surface, interface, bending test, scanning electron microscopy, atomic force microscopy, elemental distribution

Abstract

New E-glass fiber reinforced composites developed to serve cranio-facial bone reconstruction were investigated using scanning electron microscopy, atomic force microscopy and X ray diffraction to evaluate their morphology and structure. The morphological analysis of the external surface of experimental composite materials has shown that the reinforcing material was well incorporated in the polymer matrix and no monofilaments of fiber glass could be observed on the material surface. Structure analysis of the experimental composites revealed the optimal interfacial adhesion obtained using A 174 silane. Woven E glass fibers were more favourable than unidirectional fibers for manufacturing cranio-facial implants. The flexural strength of the experimental composite materials was directly influenced by the degree of reinforcement. Taking into account the obtained results, the perspective of continuing the studies appears for improving the mechanical properties so as to be as close as possible to the ones of the human bone.

References

A. Seckin, K. Baris, A. Bashar, A. Sabri, Z.S. Galip, Journal of neurosciences in rural practice, 2011, 2, 162.

U. Spetzger, V. Vougioukas, J. Schipper, Minimally Invasive Therapy & Allied Technologies, 2010, 19, 110.

J.L. Ferracane, Journal of oral rehabilitation, 1994, 21, 441.

N. Ivković, D. Božović, S. Ristić, V. Mirjanić, O. Janković, Contemporary Materials, 2013, 1, 84.

R. Huiskes, R. Ruimerman, G.H. van Lenthe, J.D. Janssen, Nature, 2000, 405, 704.

R. Suuronen, N. Ashammakhi, H. Peltoniemi, E. Waris, W. Serlo, M. Kellomaki, T. Waris, Plast Reconstr Surg, 2001, 108, 167.

J. Brandt, M. Pfennig, C. Bieroegel, W. Grellmann, A. Bernstein (April). Key Engineering Materials, 2009, 396, 331.

M.A. Lazar, D. Vodnar, D. Prodan, H. Rotaru, R.C. Roman, L.A. Sorcoi, G. Băciuț, R.S. Câmpian, Clujul Medical, 2016, DOI: 10.15386/cjmed-599.

G. Furtos, L. Silaghi-Dumitrescu, M. Moldovan, B. Baldea, R. Trusca, C. Prejmerean, Journal of Materials Science, 2012, 47, 3305.

Kokubo T., Kim H.M., Kawashita M., Biomaterials, 2003, 24(13), 2161.

R.K. Alla, S. Sajjan, V.R. Alluri, K. Ginjupalli, N. Upadhya N., Journal of Biomaterials and Nanobiotechnology, 2013, 4, 91.

M. Sonmez, D. Ficai, A. Ficai, L. Alexandrescu, G. Voicu, E. Andronescu, Revista Romana de Materiale-Romanian Journal of Materials, 2014, 44, 88.

M. Sönmez, M. Georgescu, M. Vâlsan, M. Radulescu, D. Ficai, G. Voicu, L. Alexandrescu, Journal of Applied Polymer Science, 2015, 132.

G. Furtos, B. Baldea, L. Silaghi-Dumitrescu, Materials science and engineering 2016, 59, 855.

Downloads

Published

2016-06-30

How to Cite

LAZĂR, M.-A. ., ROTARU, H. ., PRODAN, D. ., ARMENCEA, G. ., BERE, P. ., ROMAN, R. C. ., & CÂMPIAN, R. S. . (2016). EVALUATION OF THE MORPHOLOGY AND STRUCTURE OF E GLASS FIBER-REINFORCED COMPOSITES FOR CRANIO-FACIAL BONE RECONSTRUCTION. Studia Universitatis Babeș-Bolyai Chemia, 61(2), 249–260. Retrieved from https://studia.reviste.ubbcluj.ro/index.php/chemia/article/view/8323

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

<< < 14 15 16 17 18 19 20 21 22 23 > >> 

You may also start an advanced similarity search for this article.