COMPUTATIONAL IMAGE ANALYSIS AS AN ALTERNATIVE TOOL FOR THE EVALUATION OF CORROSION IN SALT SPRAY TEST
DOI:
https://doi.org/10.24193/subbchem.2020.3.04Keywords:
salt spray test, computational image analysis, corrosion assessmentAbstract
The current standards for evaluating corrosion during salt spray tests rely on the visual analysis of the specimens, and this may be a limitation when higher resolution quantitative outputs are desired. In this work, computational image analysis was used to measure the area affected by corrosion during salt spray tests with aluminum alloy, copper, carbon steel and galvanized steel plates. The software ImageJ was used to select and measure the corroded areas differentiating the corrosion products from the metals uncorroded surfaces according to their different colors. With ten measurements for each selected exposure time, a 95 % confidence interval was calculated for each material and time of exposure, giving an indication of the precision of the estimated corroded area. These data were compared with a visual inspection carried out by an experienced technician. The results indicate that computational image analysis may be a powerful tool to obtain higher resolution in the results interpretation in comparison with the standard visual analysis.
References
ASTM International; ASTM Stand., 2001, D610-01(Reapproved 2012), 1–6.
ASTM International; ASTM Stand., 2010, D7087-05a(Withdrawn 2019), 1–4.
P.J. Denissen; S.J. Garcia; Electrochim. Acta, 2019, 293, 514–524.
M. Rodošek; et al.; Corros. Sci., 2017, 126(June), 55–68.
J.L. Daure; K.T. Voisey; P.H. Shipway; D.A. Stewart; Surf. Coatings Technol., 2017, 324, 403–412.
X.-B. Chen; N. Birbilis; T.B. Abbott; Corros. Sci., 2012, 55, 226–232.
J.I. Iribarren; F. Liesa; Á. Meneguzzi; C. Alemán; E. Armelin; J. Cult. Herit., 2020, 42, 240–248.
W.P. Gardiner; Statistical Analysis Methods for Chemists Royal Society of Chemistry, Cambridge, 2007, doi:10.1039/9781847551924
A. Groysman; Corrosion for Everybody Springer Netherlands, Dordrecht, 2010, doi:10.1007/978-90-481-3477-9
S. Sathiyanarayanan; M. Sahre; W. Kautek; Corros. Sci., 1999, 41(10), 1899–1909.
R.A. Antunes; I. Costa; D.L. A. de Faria; Mater. Res., 2003, 6(3), 403–408.
R.A. Antunes; R.U. Ichikawa; L.G. Martinez; I. Costa; Int. J. Corros., 2014, 2014, 1–9.
ASTM International; ASTM Stand., 2019, B117-19, 1–11.
D.C. Montgomery; G.C. Runger; Applied statistics and probability for engineers Hoboken, USA, 2014, 6th editio Ed.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Studia Universitatis Babeș-Bolyai Chemia
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.